Skip to main content

Butterfly For Jessica!!!


Jessica, here is one of the 2 butterflies on the "Create a Critter" cartridge.  



I laid out four colors that I wanted to use on my mat, the first picture shows this.  Then I cut all 4 layers with my dial size set at 3 inches. (Make sure you don't have your real dial size button on or your layers won't fit.)









The second picture shows all four cuts, I know the pink one in the right corner is kind of hard to see.








The last picture is all four cuts glued together!!  I had to replace the pink with blue because I accidentally put the glue on the wrong side of one of the wings and the other was already glued on lol!!  Operator error!! 




This butterfly, I thought, was very simple and is very cute!!!  Thank you for the opportunity to answer your question!!  I will post the second one in a little bit!!!

Happy Crafting!!!!

Comments

Post a Comment

Popular posts from this blog

Frisky Melon!!

 I made this card for the Fantabulous Cricut Challenge Blog's Challenge Me Monday Contest!!  Yay!!  I started with a piece of pink cardstock cut at 5 1/2"x 8 1/2" and folded it in half for the base of my card.  This was from one of The Paper Company's value packs.  Then I cut a piece of black cardstock, also from The Paper Company, at 5 1/4"x 4" and used it as my first layer.  I attached this using my ATG gun. For my second layer I cut a piece of paper from the Colorbok Pattern Pack at 5"x 3 3/4".  I then wrapped a piece of grosgrain ribbon around it and secured it in the back using regular tape.  Then I attached the whole thing using my ATG gun.   I cut the watermelon at 4" using the "Stretch Your Imagination" cartridge with my Cricut Expression.  I used a black, pink and green paper, all were from The Paper Company value packs.  I attached it to the card using 3D-Dots. Then to finish off this card I added a My P...

Ice Cream Card

I am so proud of this card!!!  I had an overwhelming sense of accomplishment when I finished this project.  I made this card for Fantabulous Cricut's Challenge Me Monday Contest.  The challenge was to make a project incorporating ice cream, cold drinks or just any cool treat.  It took me a couple days to get it right but I finally got it finished up last night and so I wanted to share it with you all today!!! I started with a 5.5"x8.5" piece of card stock folded in half for the base of my card.  It was a piece of brown from The Paper Company's Natural Fashion Colors value pack.  Then I cut a piece of dark orange from the same pack at 5 1/4" x 4" and used it for my first layer on the card.  I attached it using my ATG gun. Then I used a piece of paper from DCWV Animal Crackers matstack and cut the bowl.  The bowl is from the Cricut cartridge "Create a Critter" and I cut it at 3" using the real dial size button.  Also from this cartrid...

BFF Card

I made this card for the Fantabulous Cricut Challenge Blog's Challenge Me Monday #71 .  Wow, that's a mouth full, LOL.  This weeks challenge was to make a card for a friend.  Now, I have a friend in mind for this card, but if I say it on here it'll give it away before she can get it!! ALL cardstock is from The Paper Company's value packs. I started with a 5 1/2"x 8 1/2" piece of blue cardstock and folded it in half for the base of my card.  Then, for my first layer, I cut a piece of light green card stock at 5 1/4"x 4".  I layered a piece of lavender colored cardstock that was cut at 5 1/4"x 2 1/2" on the top half of the green cardstock using my ATG gun.  I covered up the "seem" of where the papers meet with a piece of light pink grosgrain ribbon and secured it on the back using regular Scotch tape.  I attached the whole thing to the base of the card using my ATG gun. I used the "Create a Critter" cartridge wi...